The Best Way to Transform Antique Furniture With Fusion Mineral Paint

 

All of us come across those series quitting pieces from yesteryear that we presume would seem great within our domiciles. However, as with many parts of furniture, maybe it's a glossy old end, components of it can not be in as good of form, or in it's fairly essential, perhaps it's just not the right coloring. Although we love the expression of natural wood and also have an outstanding deal of wonderful products that will help accentuate wood -- like as our Stain and also Finishing Oil and Hemp Oil, some times painting a piece transforms it in a manner that nothing else can. Thus today we will teach you how to transform classic furniture using Fusion Decorative Paint, together with our gorgeous teal-blue color sea-side!

STEP 1

This project features an obsolete side-board that inspite of the prior photo, had seen. The glistening end was patchy and wearing in a few spots and others, which makes for an uneven surface. We constantly attempt to emphasize, that for every painting undertaking, a fresh slate is your important part of one's homework as the paint project is only going to be as good as a prep.

Start with removing the components and some other keyholes. Provide the piece of household furniture a superior cleaning with our TSP to eliminate any gunk or residue which may clog up your sandpaper.

SANDING & STRIPPING

Work with a thick sanding block, wrap it with 220 grit sand and paper in even strokes going from the direction of this grain. In case a piece of household furniture has deep gauges or marks, heavier scratches and dings may require the use of an orbital sander, just to smooth the surface out.

With this piece, the legs of those side-board were in really good shape therefore we wished to blot them to showcase the beautiful wood. We stripped off the thighs to bare wooden by means of a chemical stripper and metal wool (there still are several compound strippers that can be found on industry - in the event that you ought to prevent harsh chemicals, you have to invest in a superb sander for down to bare wood to sanding)

Later they were coated with Mineral Spirits to get rid of any residue. Mineral Spirits are also important touse if your slice has been waxed, because you cannot paint over wax along with the sole means to remove wax is using mineral spirits. Once that is achieved, let it dry for somewhere around 4+ hours per day. Check out this link for fruitful information right now.

STEP 3

We applied that a Staalmeester faux brush series brush to apply thin, even coats of paint. Fusion Mineral Paint at sea-side only demanded 2 coats for total protection. For a very smooth complete, you are able to sand in between coats together with 320-400 grit paper.

After the last coat of paint has dried, apply 220 grit sandpaper to gently distress across the increased edges where natural don will arise. Since this sideboard has raised trim and side panels, then merely the advantages were distressed. For those who have trouble painful or don't understand where you should distress, then you should decide to try out a sand!

Spray your piece down with warm water to reactivate the paint. Carry your 220 grit sandpaper and lightly sweep on the other side of the top layer. This will definitely very subtly and much more naturally distress your piece, also you also can really get a handle on howmuch painful there is. In the event you opt subsequently that you do not enjoy the distressing or you did too much, you are able to simply paint it over!